This tester is the industry’s smallest 10G handheld instrument and supports testing throughout the entire service life cycle including fiber characterization, service activation, troubleshooting, and maintenance.
The T-BERD®/MTS-5800 handheld network tester is the one tool that network technicians and engineers need to install, turn-up, and maintain their networks. It supports both the legacy and emerging technologies required to handle various network applications including metro/core, mobile backhaul, and business services installations. The industry’s smallest handheld instrument can test throughout the service life cycle, including fiber characterization, service activation, troubleshooting, and maintenance. Advanced Ethernet test features such as TrueSpeed per RFC 6349, J-Profiler™, Wirespeed capture/decode, and automated J-Mentor, help field technicians test their networks faster and more accurately than ever before.
Simplifies multitechnology testing with an all-in-one dual-10 G handheld
Optimized for field use with a multitouch screen, scripted workflows, and clear results
Supports efficient best practices with repeatable methods and procedures
Speeds fiber characterization, Ethernet service activation, and troubleshooting tests
Empowers cell-site technicians to easily install and maintain back haul and front haul networks
Avoid costly and dangerous tower climbs
Fully-loaded TDM/PDH to dual 10 G Ethernet, SONET, SDH, Fibre Channel, and OTN support
Automated, enhanced RFC 2544 and SAMComplete testing per ITU-T Y.1564
Integrated burst testing approach per MEF 34 and RFC 6349 TrueSpeed™ TCP throughput testing
Integrated Timing/Synchronization testing including PTP/1588v2, SyncE, Wander, and One Way Delay test
Fronthaul Testing CPRI/OBSAI Layer 1/Layer 2 and emulation of Baseband and Remote Radio units
Single- and dual-port versions
Compatible with Viavi 4100-Series OTDR modules and Smart Link Mapper™, fiber microscopes, and optical power meters
Applications • Tests and troubleshoots converged Ethernet/IP networks at 10 Mbps to 10 G interfaces – Tests Layer 1-3 Ethernet/IP SLAs with an automated, enhanced RFC 2544/SAMComplete per ITU-T Y.1564 – Integrated approach to burst testing including CBS verifies buffer settings and TrueSpeed per RFC 6349 for performance testing so you can experience your network the way your customers do – Robust troubleshooting capabilities including network discovery, top talker analysis, deep packet capture, packet analysis, and expert guidance • Tests TDM/PDH to SONET/SDH at OC-3/STM-1 to OC-192/STM-64, including service disruption measurements and path overhead (POH) capture with triggers • Tests dual FC (1, 2, 4 G) for service activation and maintenance of SANs and low-latency circuits • Verifies network synchronization – Emulates a 1588v2 master clock/slave recovery for proper point-to-point (PTP) message propagation and verification of packet-delay variation (PDV) – Verifies SyncE frequency synchronization accuracy and Ethernet synchronization message channel (ESMC) message propagation • Supports SFP and XFP pluggable optics, including 50 GHz C-band tunable XFPs • Six T-BERD/MTS-5800 configurations: – Single- and dual-port Ethernet versions – With or without TDM/PDH interfaces – Fully loaded TDM/PDH to 10 G Ethernet, SONET, and SDH
All-in-One Handheld Tool • Industry’s smallest 10 G handheld instrument that supports Ethernet, SONET/SDH, PDH, and CPRI/OBSAI testing – All test interfaces readily available – Large screen (7 inches) to display test information – Configure to best meet your needs • State-of-the-art platform supports: – Bluetooth to easily offload results – WiFi for test set connectivity – Store 1000s of reports – FiberScope connectivity
Soft carry case
All packages with Ethernet include Layers 1, 2, and 3 (Ipv4) and multiple streams (CoS). All pakcages with 10GE include LAN & WAN. All packages with DS1 include DS0 & PRI ISDN. All dual port packages contain (1) set of SFPs must be purchased for dual optical testing.